+39 030 320 301 [email protected]

LOW VOLTAGE SHUNT CAPACITORS

What if you never had to wait for months anymore in order to get your capacitors?

Our delivery time starts from 2 weeks*!

 

Main features of Gruppo Energia capacitors for Low Voltage applications:

fully customizable  to suit your needs;

dry type;

– high quality (we are certified CE, VDE, UL, cULus, ISO, SASO, EAC);

 

Need assistance? 

Do you need help in choosing the right capacitors for your needs? Contact us! Our technical department is always happy to help!

Alternatively, you can read our suggestions here

 

*for certain products and depending on the season. 

 

Standards:

  • DIN EN 60831-1 (VDE 0560-46): 2014-11; EN 60831-1:2014
  • DIN EN 60831-2 (VDE 0560-47): 2014-11; EN 60831-2:2014

Origin: 100% made in Italy

 

OUR SERIES

Low voltage three-phase capacitors aluminium case Gruppo Energia

RCM-INB-3

Three-phase power factor correction capacitors

Designed to be used in standard conditions, where the presence of non-linear loads is not significant.

NLL < 10%

Applications: 

  • Networks with non significant non-linear loads;
  • Standard overcurrent;
  • Standard operating temperature;
  • Normal switching frequency;
  • Standard life expectancy.

For more information, please consult the table below: 

General
Voltage range 220 V to 1000 V
Frequency 50 Hz / 60 Hz
Power range 1 kVar to 62,5 kVar
Insulation level 3/8 kV
Dielectric Al/Zn slope metallized polypropylene film, wave-cut
Filling gel-type polyurethane resin, Non-PCB
Casing sealed metal (aluminium) enclosure
Operating conditions
Ambient temperature min. -40°C / max. 55° C
Overvoltage Un +10% for 8 hrs. daily
Overcurrent up to 1,5 x In (including iarmonics)
Inrush current up to 180 x In
Service life up to 100.000 hrs.
Harmonic presence NLL <10%
Safety features
Safety overpressure disconnector on three phases + incorporated fuses + self-healing + discharge resistor
Protection degree IP 20

Other power and voltage levels are available upon request. For more information, don’t hesitate to contact us.

 

 

High quality capacitors for Power Factor Correction Made in Italy

RCM-INP-3

Three-phase power factor correction capacitors (heavy duty)

Resistant to current overloads and designed to work in difficult conditions, even in case of a limited quantity of non-linear loads. The current resistance of the Intact Plus series is higher compared to the previous capacitor series.

NLL < 20%

Applications: 

  • Few non-linear loads;
  • Significant overcurrent;
  • High operating temperature;
  • Significant switching frequency;
  • Long life expectancy.

Please consult the table below: 

 

General
Voltage range 220 V to 1000 V
Frequency 50 Hz / 60 Hz
Power range 1 kVar to 50 kVar
Insulation level 3/8 kV
Dielectric Al/Zn slope metallized polypropylene film, wave-cut
Filling
gel-type polyurethane resin, Non-PCB
Casing
sealed metal (aluminium) enclosure
Operating conditions
Ambient temperature min. -40°C / max. 55° C
Overvoltage Un +10% for 8 hrs. daily
Overcurrent up to 1,8 x In (including harmonics)
Inrush current up to 250 x In
Service life up to 160.000 hrs.
Harmonic presence NLL <20%
Safety features
Safety overpressure disconnector on three phases + incorporated fuses + self-healing + discharge resistor
Protection degree  IP 20


Other power and voltage levels are available upon request. For more information, don’t hesitate to contact us.

 three-phase Capacitors All Power

 

RCM-INA-3

Three-phase power factor correction capacitors (extra heavy duty)

Highly reliable capacitors for operation in harsh environments or when there is a significant level of non-linear loads. They are resistant to high overloads in current and voltage. Intact AllPower series is also resistant to high temperatures.

NLL <25%

Applications: 

  • Significant number of non-linear loads (up to 25%);
  • Significant overcurrent;
  • Extreme temperature conditions;
  • Significant switching frequency;
  • Extra long life expectancy.

For more information, please consult the table below: 

General
Voltage range 220 V to 1000 V
Frequency 50 Hz / 60 Hz
Power range 1 kVar to 50 kVar
Insulation level 3/8 kV
Dielectric Al/Zn slope metallized polypropylene film, wave-cut
Filling gel-type polyurethane resin, Non-PCB
Casing sealed metal (aluminium) enclosure
Operating conditions
Ambient temperature min. -45°C / max. 60° C
Overvoltage Un +10% continuous operation
Overcurrent up to 2,5 x In (including harmonics)
Inrush current up to 280 x In
Service life up to 180.000 hrs.
Harmonic presence NLL < 25%
Safety features
Safety
overpressure disconnector on three phases + incorporated fuses + self-healing + discharge resistor
Protection degree
IP 20

 

Other power and voltage levels are available upon request. For more information, don’t hesitate to contact us.

Single-phase power factor correction capacitors

RCM-1:

Single-phase capacitors designed to be used in standard conditions, where the presence of non-linear loads is not significant.

NLL < 10%

Applications: 

  • Networks with non significant non-linear loads;
  • Standard overcurrent;
  • Standard operating temperature;
  • Normal switching frequency;
  • Standard life expectancy.

For more information, please consult the table below: 

General
Voltage range 220 V to 1000 V
Frequency 50 Hz / 60 Hz
Power range 0,25 kVar to 50 kVar
Insulation level 3/8 kV
Casing sealed metal (aluminium) enclosure
Dielectric Al/Zn slope metallized polypropylene film, wave-cut
Filling  gel-type polyurethane resin, Non-PCB
Operating conditions
Ambient temperature min. -40°C / max. 55° C
Overvoltage Un +10% for 8 hrs. daily
Overcurrent up to 1,5 x In (including harmonics)
Inrush current up to 180 x In
Service life up to 100.000 hrs.
Harmonic presence NLL <10%
Safety features
Safety overpressure disconnector (discharge resistor available upon request)
Protection degree IP 20

Other power and voltage levels are available upon request. For more information, don’t hesitate to contact us.

Share to